Chapter 16.52 I-1 INDUSTRIAL ZONES
Section 16.52.030 Area, frontage, location, height and special provisions.
There shall be no area,
frontage, location, height
and special provisions in
the I-1 industrial zone,
except for the following:
A. For caretaker
dwellings, the regulations
shall be the same as
required in the R-4
residential zone except that
the area, frontage and
location requirements shall
be waived for dwellings
erected above the ground
floor when the ground
floor is designed and used
exclusively for commercial
or industrial purposes.
B. All buildings shall
be set back a minimum of
thirty (30) feet along the
U.S. Highway 40 right-of-way line.
C. Buildings and
structures within the
airport area zones must
comply with airport area
height restrictions.
D. Landscaping shall
be in conformance with
Chapter 16.27 herein.
E. Fence
requirements. Industrial
developments adjacent to
property zoned and / or
used for residential
purposes shall have a six-foot (6') privacy fence
between the industrial and
residential properties to
afford privacy for the
residential dwelling. The
fence shall be installed so
as not to create a safety
hazard for vehicular and
pedestrian traffic. Where
the Planning Commission
determines that such a
fence is not necessary, or
in the best interest of the
public, the Planning
Commission may waive
the fence
requirement.
(PZSC § 03-26-003) (Ord. No. 96-27,
Amended, 11/20/96)
(Ord. 2003-28, Amended, 12/04/2003, Prior Text)